Mechanical Engineering

• Abrahamson, Karl Reid (1987) The stochastic simulation of methane oxidation behind reflected shock waves [M.S.] Mechanical Engineering
• Adam, Christopher S. (1997) Ground penetrating radar for non-destructive evaluation of concrete bridge decks [M.S.] Mechanical Engineering
• Adamowicz, Lukas (2019) Functional Rotation Axis Based Approach for Estimating Hip Joint Angles Using Wearable Inertial Sensors : Comparison to Existing Methods [M.S.] Mechanical Engineering
• Algera, Robert (1979) Human body dynamics during restrained fall [MS] Mechanical Engineering
• Allen, Luke Daniel (2016) Assessment of Surface-Catalyzed Reaction Products From HighTemperature Materials in Plasmas [MS] Mechanical Engineering
• Altshuler, Kenneth J. (1993) The study of friction and wear using a pin-on-disk tribometer [M.S.] Mechanical Engineering
• Ambrose, Timothy P. (1994) Automation of wire handling and stripping manufacture of multiconductor coaxial cable [M.S.] Mechanical Engineering
• Amidon, John Leonard (1970) Application of the hydraulic analogy to supersonic flow over bluff bodies.[MS] Mechanical Engineering
• Angola Abreu, Enrique D. (2018) Novelty Detection of Machinery Using a Non-Parametric Machine Learning Approach [M.S.] Mechanical Engineering
• Arcovitch, Cory (2017) Fabrication and Thermoelectric Characterization of Stretchable Conductive Latex-Based Composites [MS] Mechanical Engineering
• Arms, Steven W. (1984) Knee ligament strain [M.S.] Mechanical Engineering
• Bacher-Chong, Eli (2022) Constraint-Aware and Efficiency-Aware Control of Air-Path in Fuel Cell Vehicles [M.S.] Mechanical Engineering
• Ballou, Ian (2023) Investigation of Silane Coating Treatments on Phynolic Impregnated Carbon Ablator for Mars and Future Planetary Exploration [M.S.] Mechanical Engineering
• Barbir, Ana (2010) Mechanobiology of the rat intervertebral disc in compression and torsion [PhD] Mechanical Engineering
• Barlett, Brent (2005) Design of a microturbine driven by catalytically decomposed hydrogen peroxide [MS] Mechanical Engineering
• Berg, William Henry (1962) A factorial experiment to determine the significant characteristics of a hydraulic motor.[MS] Mechanical Engineering
• Bernard, Donald E. (2018) Optimization of Turbulent Prandtl Number in Turbulent, Wall Bounded Flows [MS] Mechanical Engineering
• Beynnon, Bruce (1986) The Vermont Spinal Fixator for posterior thoracic, lumbar and lumbosacral spine stabilization [M.S.] Mechanical Engineering
• Beynnon, Bruce D. (1991) The I̲n̲ v̲i̲v̲o̲ biomechanics of the anterior cruciate ligament, reconstruction, and application of a mathematical model to the knee joint [Ph. D.] Mechanical Engineering
• Blodgett, Frederick M. (1978) Dynamic characteristics of two degree of freedom systems with quadratic type damping [MS] Mechanical Engineering
• Bloom, George Henry (1968) The effect of surface finish on the dynamic fatigue of glass rods subjected to Hertzian stress.[MS] Mechanical Engineering
• Bond, Justin M. (2017) Status Monitoring of Inflatables by Accurate Shape Sensing [MS] Mechanical Engineering
• Booth, Andrew P. (1988) A thermistor based low velocity current meter [M.S.] Mechanical Engineering
• Boule, Richard F. (1976) Method of predicting direction of crack propagation from a flaw in two dimensions.[MS] Mechanical Engineering
• Bracken Edward J., (1973) Inequality constraints for the contact problem in elasticity.[MS] Mechanical Engineering
• Brandriss, Owen Michael (2023) Performance of a Low-Reynolds Discrete Swirl Injection Method Under a Range of Design Parameters [M.S.] Mechanical Engineering
• Breed, John Lincoln (1962) The dynamic mechanical properties of polymethylmethacrylate cantilevers at resonance.[MS] Mechanical Engineering
• Brosseau, Timothy Lee (1967) A numerical method for determining transient thermal stresses in centrally heated short hollow cylinders.[MS] Mechanical Engineering
• Brown, Christopher Aldrich (1983) Material behavior during chip formation [PhD] Mechanical Engineering
• Brown, Jerry L. (1985) Some theoretical and experimental aspects of metal turning operations [M.S.] Mechanical Engineering
• Brown, Christopher Aldrich (1979) A dynamic fracture energy test for nonstandard specimens [M.S.] Mechanical Engineering
• Brown, Grace E. (1974) Instruction in clinical dental radiology through multisensory individualized learning units.[MEd] Mechanical Engineering
• Brown, Jerry L. (1995) The effects of electromagnetic stirring on solidification in investment casting [Ph. D.] Mechanical Engineering
• Brush, Donald C. (1974) A design tool for the solution of contact problems in elasticity in two dimensions [MS] Mechanical Engineering
• Budcharoentong, Dech (1973) Simulation and design of feedback control systems for vibration.[MS] Mechanical Engineering
• Buller, Marvin Lawrence (1976) Effects of a confining wall upon natural convection from a rectangular fin heat sink.[MS] Mechanical Engineering
• Bullis, Stephen James (1974) On the convergence of a finite element method solution to the nonlinear heat conduction problem.[MS] Mechanical Engineering
• Burns, Dylan (2006) Aeroelastic mechanics of thin film membranes in proximity lithography [MS] Mechanical Engineering
• Burns, Dylan (2011) Ambulatory lordosimeter measurement and feedback control of seated posture [PhD] Mechanical Engineering
• Burton, Jonathan Robert (2020) Subsurface Sensing With Shakers and Inspection Vehicles [M.S.] Mechanical Engineering
• Buturla, Edward Michael (1976) Convergence investigations of parabolic and hyperbolic finite element formulations [Ph. D.] Mechanical Engineering
• Buturla, Edward Michael (1970) Optimization of photographic registration in a thermal environment.[MS] Mechanical Engineering
• Carnes, William O. (1968) The fracture energy of composite materials.[MS] Mechanical Engineering
• Castle, Robert Wilmot (1972) An investigation of the fracture of long bone.[MS] Mechanical Engineering
• Charron, Patrick N. (2015) Burst Pressure Properties and Ex Vivo Analysis of Alginate-Based Hydrogels for Tissue Sealant Applications [MS] Mechanical Engineering
• Chevalier, John R. (1970) The effects of cyclic loading and varying humidity on crack velocity in glass with fracture energy determination of selected brittle materials.[MS] Mechanical Engineering
• Chivers, Thomas (2023) Estimating Particle Velocity From Dual-Camera Mixed Reality Video Images Using 3D Particle Tracking Velocimetry [M.S.] Mechanical Engineering
• Church, Robert B. (1998) Accerleration profiles for quantification of lifting technique [M.S.] Mechanical Engineering
• Clark, Steven H. (1994) Thermal effects of thermocouple embedding in solid propellants [M.S.] Mechanical Engineering
• Coates, Audrey D. (2000) The design, development, and validation of the EMG grid [M.S.] Mechanical Engineering
• Cohen, Rachael E. (1986) Variations in the microstructure of hot-worked 1035 steel [M.S.] Mechanical Engineering
• Colón-Emeric, Edgardo Antonio (1994) A parametric model of the human torso during sinusoidal vibrations [M.S.] Mechanical Engineering
• Coulson, Rebecca (2002) Effects of smooth muscle cell activation and ischemia on the mechanical properties of cerebral arteries [M.S.] Mechanical Engineering
• Cowley, Leonie (2011) Mechanical role of phospholipid bilayers in boundary lubrication of synovial joints [M.S.] Mechanical Engineering
• Crocker, Ryan Campbell (2015) Direct numerical simulation of ablative boundaries in turbulent and laminar flows [PhD] Mechanical Engineering
• Crowninshield, Roy Douglas (1973) On the strain rate effects of anisotropic bone in tension.[MS] Mechanical Engineering
• Cui, Jianhong (2012) Multiple sensor periodic nondestructive evaluation on concrete bridge deck maintenance [PhD] Mechanical Engineering
• Curran, Kelly (2021) Statistics of Particle Diffusion Subject to Oscillatory Flow in a Porous Bed [M.S.] Mechanical Engineering
• Dansereau, Jean (1987) Rib cage deformation in scoliosis [Ph. D.] Mechanical Engineering
• Das, Prasanta (1971) Dynamics of passenger restraint systems.[MS] Mechanical Engineering
• Das, Pranab Kumar (1969) An energy absorber utilizing plastic deformation of metal [MS] Mechanical Engineering
• Diehl, Matthew D. (1992) Modeling of thermal benefits for diamond coated alumina tool inserts [M.S.] Mechanical Engineering
• Diez, Sandra Romero (2018) Crystallization Study of Polymers Under High Pressure Gas / Supercritical Fluid [M.S.] Mechanical Engineering
• Dion, Eric P. (1995) The development of a transmission system for a solar powered vehicle [M.S.] Mechanical Engineering
• Dougherty, Maximilian (2011) Surface catalyzed recombination reactions for high-speed Mars atmosphere entry [MS] Mechanical Engineering
• Dougherty, Maximilian (2015) Numerical Simulations of Reacting Flow in an Inductively Coupled Plasma Torch [PhD] Mechanical Engineering
• Duke, Steven Roy (1976) On crack initiation and growth in brittle elastic media.[MS] Mechanical Engineering
• Dupont, Virginie (2008) Multiscale modeling of contact plasticity and nanoindentation in nanostructured FCC metals [PhD] Mechanical Engineering
• Durham, Delcie Rena Chaplin (1981) Modelling adiabatic deformation: the metallurgical requirements [PhD] Mechanical Engineering
• Durham, Delcie Rena Chaplin (1974) The effects of airgap interfacial conductance and superheat solidification heat transfer.[MS] Mechanical Engineering
• Edwards, Michael (2015) Characterization of Fillite as a Planetary Soil Simulant in Support of Rover Mobility Assessment in High-Sinkage/High-Slip Environments [MS] Mechanical Engineering
• English, Edward Alexander (1976) Anti-icing system : land based gas turbines.[MS] Mechanical Engineering
• Etter, Jennifer (2019) Development and Characterization of Multi-Crosslinking Injectable Hydrogels for Use in Cell and Drug Delivery [Ph. D.] Mechanical Engineering
• Ettlinger, Carl Frederick (1970) On the prevention of ski injuries.[MS] Mechanical Engineering
• Ezequelle, Wilson (2020) Active Magnetic Sensing for Urban Target Discrimination [M.S.] Mechanical Engineering
• Fahey, Sean O'Flaherty (1996) A novel eight-member mechanism with application in precision two wheel automotive steering including a detailed discussion of Ackermann's patent moveable axles [M.S.] Mechanical Engineering
• Faletra, Melissa Kathleen (2014) Segregation of particles of variable size and density in falling suspension droplets [MS] Mechanical Engineering
• Fang, Qiongjiali (2015) The Interaction Mechanisms of a Screw Dislocation With a Defective Coherent Twin Boundary in Copper [MS] Mechanical Engineering
• Fang, Qiongjiali (2020) Understanding Grain Boundary and Stress Concentration Effects on Strengthening Mechanisms in Nanotwinned Metals [Ph. D.] Mechanical Engineering
• Farajidizaji, Farzad (2018) Numerical Modeling of Collision and Agglomeration of Adhesive Particles in Turbulent Flows [Ph.D.] Mechanical Engineering
• Farmer, James Robert (1986) On the feasibility of plasticine modeling of metallic deformation processes [M.S.] Mechanical Engineering
• Farrell, Robert J. (2018) Rotating Magnetometry for Terrestrial and Extraterrestrial Subsurface Explorations [M.S.] Mechanical Engineering
• Faryniarz, Luke J. (2014) Mathematical modeling of hydrogen peroxide catalysis for mems thruster applications [MS] Mechanical Engineering
• Fischer, Mark A. (1981) Feasibility study of waste water heated aquacultural raceways [M.S.] Mechanical Engineering
• Fitzmorris, Daniel James (1984) Analysis of a symmetric, self-damped pneumatic shock absorber [M.S.] Mechanical Engineering
• Fleder, Edward (1984) Nonlinear dynamic behavior of a turrested weapon system [M.S.] Mechanical Engineering
• Fleming, Braden C. (1996) The in vivo strain behavior of the anterior cruciate ligament during stationary bicycling : an experimental and analytical investigation [Ph. D.] Mechanical Engineering
• Folsom, Lawrence R. (1972) Energy absorbing restraint system for a light plane.[MS] Mechanical Engineering
• Freiheit, Collin J. (2020) Reference Governors for Time-Varying Systems and Constraints [M.S.] Mechanical Engineering
• Fuhrmann, Andrew (2015) Effect of rainfall events on the thermal and moisture exposure of underground electric cables [MS] Mechanical Engineering
• Gagne, Kevin R. (2016) Development of an Additively Manufactured Microthruster for Nanosatellite Applications [MS] Mechanical Engineering
• Gallo, James David (1967) The behavior of conical indentation fractures in glass.[MS] Mechanical Engineering
• Gardner-Morse, Mack G. (1990) Model analysis of a cable-stayed pedestrian bridge [M.S.] Mechanical Engineering
• Garland, Damien (2022) Active Acoustic Sensing Technologies for Practical Uav-Based Condition Assessment of Underside Bridge Decks [M.S.] Mechanical Engineering
• Gerry, Donald John (1966) Fracture energy determination of selected brittle materials using an original technique.[MS] Mechanical Engineering
• Ghazi, Christopher J. (2014) Measurement of Fluid and Particle Transport through Narrow Passages [MS] Mechanical Engineering
• Ghose, Sunil Kumar (1969) Two-phase blowdown from vessels including bubble rise and condensate drop dynamics [MS] Mechanical Engineering
• Gill, Jason (1998) Application of bulge testing techniques in determining the mechanical properties of thin films [M.S.] Mechanical Engineering
• Girard, Joshua Harrison (2022) On the Enhancement of Penetrating Radar Target Location Accuracy With Visual-Inertial SLAM [M.S.] Mechanical Engineering
• Gopalkrishnan, Akiva (2022) Finite Element Deformation of Silver Nanowire Networks [M.S.] Mechanical Engineering
• Graves, William R. (1990) Fixed-interface component mode synthesis using complex substructure mode shapes with non-proportional damping [M.S.] Mechanical Engineering
• Green, Adam Michael (2016) Structure and Dynamics of Two Flow Fields Used for Particle Deposition Onto and Removal From a Substrate [PhD] Mechanical Engineering
• Greenfield, Benjamin J. (2012) Numerical simulations of multiphase flow in supersonic micro-nozzles [MS] Mechanical Engineering
• Gregory, Diarmuid (2022) Chitosan-Based Shrinking Fibers for Post-Cure Stressing to Increase Durability of Concrete [M.S.] Mechanical Engineering
• Grosso, Roger O. (1971) A study of the interaction of load alleviation devices and humans in vertical acceleration [MS] Mechanical Engineering
• Gu, Jingjun (2013) Roles of surface and internal structures in the mechanical behavior of carbon nanofibers [PhD] Mechanical Engineering
• Gurchiek, Reed Donovan (2021) Towards Remote Gait Analysis : Combining Physics and Probabilistic Models for Estimating Human Joint Mechanics [Ph. D.] Mechanical Engineering
• Hagan, Dan (2014) Numerical study of particle bed scour by vortices [MS] Mechanical Engineering
• Hagan, Daniel Stokes (2018) Large Eddy Simulation of Oscillatory Flow Over a Mobile Rippled Bed Using an Euler-Lagrange Approach [Ph. D.] Mechanical Engineering
• Hamilton, Douglas A. (1999) Y-stage design for x-ray lithography [M.S.] Mechanical Engineering
• Harris, Timothy R. (2003) Geometric effects on separation surfaces in converging microchannel flows [Ph. D.] Mechanical Engineering
• Harvey, William J. (2023) The Overpressurization and Surface Contamination of On-Demand Pressure Systems [M.S.] Mechanical Engineering
• Hathaway, Wayne H. (1976) Analysis of the free flight aerodynamics on non-symmetric bodies from ballistic spark range data [MS] Mechanical Engineering
• He, Zhi (2001) Quantitative sonographic prostate cancer characterization [M.S.] Mechanical Engineering
• Heffernan, Thomas Joseph (2020) Microwave Assisted Heating of a Ferromagnetically-Doped Propellant for Small Satellites : An Efficacy Study [M.S.] Mechanical Engineering
• Heitmann, Kjell Alan (1979) Design of a yacht rig [M.S.] Mechanical Engineering
• Henderer, Willard Everett (1976) On the art of tapping metals[Ph. D.] Mechanical Engineering
• Henderer, Willard Everett (1974) An investigation of internal thread formation by cold form tapping.[MS] Mechanical Engineering
• Herrmann-Stanzel, Roland (2019) Energy Accommodation From Surface Catalyzed Reactions in Air Plasmas [M.S.] Mechanical Engineering
• Hesler, Stephen (1983) Analysis of lumbar spine response to swept-sine excitation [M.S.] Mechanical Engineering
• Hewitt, Gregory Frank Sutton (2010) A computational investigation of particle focusing and dispersion in corrugated tubes [MS] Mechanical Engineering
• Hinckley, David (2015) Multi-satellite formation trajectory design with topological constraints over a region of interest using differential evolution [MS] Mechanical Engineering
• Hinckley, David William (2019) Multi-Objective Optimization Mission Design for Small-Body Coverage Missions [Ph. D.] Mechanical Engineering
• Homer, Joseph J. (1974) Application of an inequality constraint to contact stresses in gear teeth.[MS] Mechanical Engineering
• Hu, Jing Qiong (2000) Good impedance match antenna (GIMA) design and its applications for ground penetrating radar in concrete structures NDE applications [M.S.] Mechanical Engineering
• Humphreys, Anna M. (2021) Characterization of Pressure and Temperature Reactions in an On-Demand Pressurization System for Small Satellite Propulsion [M.S.] Mechanical Engineering
• Hurley, David (2008) Laser copper plasma X-ray source debris characterization [MS] Mechanical Engineering
• Hurley, David A. (2012) Embedded and remote systems for damage detection, assessment, and repair [PhD] Mechanical Engineering
• Hurwitz, Zachary Lawrence (2020) Economic Efficiency and Carbon Emissions in MES With Flexible Buildings [M.S.] Mechanical Engineering
• Jacobs, Carl Henry (1974) An analysis of the drilling characteristics of bovine bone [Ph. D.] Mechanical Engineering
• Jacobs, Carl Henry (1973) The machining characteristics of bovine bone.[MS] Mechanical Engineering
• Jagun, Precious T. (2020) Characterization of the University of Vermont Plasma Torch and Simulation of Pyrolysis Gas and Plasma Interactions [M.S.] Mechanical Engineering
• Jin, Xing (2020) Three-Phase Hybrid Model of Bacterial Biofilm Growth [Ph. D.] Mechanical Engineering
• Johnson, Andrew W. (1976) Methods of predicting crack initiation from a flaw in two dimensions.[MS] Mechanical Engineering
• Karasinski, Michael (2017) Manufacturing Microfluidic Flow Focusing Devices for Stimuli Responsive Alginate Microsphere Generation and Cell Encapsulation [MS] Mechanical Engineering
• Kellogg, David Holt (1964) The effect of absorbed coupling agents on the glass-finish-resin interface.[MS] Mechanical Engineering
• Khodabandeloo, Sadegh (2023) Biomechanical Outcomes 1 Year After Acl Reconstruction and Meniscus Surgery [M.S.] Mechanical Engineering
• Kim, Eric S. (2018) Smart in situ fibers and their applications [M.S.] Mechanical Engineering
• Kita, James P. (1974) On the behavior of Gardon type heat gages with transient boundary conditions.[MS] Mechanical Engineering
• Koch, Meredith Ericson (2014) Mechanical Optimization Of Poly(vinyl Alcohol) Cryogels To Activate Osteochondral Mechanotransduction Pathways [MS] Mechanical Engineering
• Kontis, George (1974) A simulation of snowmobile and snow foundation dynamics.[MS] Mechanical Engineering
• Korecki, Casey L. (2005) Development of an organ culture system for evaluating damaging compression loading on intervertebral disc explants [MS] Mechanical Engineering
• Korecki, Casey L. (2008) Effects of compression loading, injury, and age on intervertebral disc mechanics, biology and metabolism using large animal organ and cell culture systems [PhD] Mechanical Engineering
• Korsko, Stefen (1994) Computation and modeling of droplet evaporation [M.S.] Mechanical Engineering
• Kosmopoulos, Victor (2003) Trabecular bone damage and repair [Ph. D.] Mechanical Engineering
• Krause, William Robert (1974) Mechanical changes in the knee post meniscectomy.[MS] Mechanical Engineering
• Kujawa, Jeffrey P. (2004) Numerical simulations of steady and transient flow in a supersonic MEMS nozzle [M.S.] Mechanical Engineering
• Kumble, Raghvir G. (1973) The evaluation of anisotropy and plane strain properties of cast and wrought materials.[PhD] Mechanical Engineering
• Languerand Lagies, Dulcie (2007) Multiscale investigation of the mechanical properties of high-strength polymeric fibers [MS] Mechanical Engineering
• Laracy, Aidan Ridner (2020) The Iteration Domain Reference Governor, a Constraint Management Scheme for Batch Processes [M.S.] Mechanical Engineering
• Lee, Robert Bruce (1967) A transient thermal and residual stress analysis model comnsidering elastic-plastic strain in a thin disk.[MS] Mechanical Engineering
• Lehneman, James B. (1993) A method of measuring the cross-sectional area of soft connective tissues during mechanical testing [M.S.] Mechanical Engineering
• Liebschner, Michael A. K. (1998) Hydraulic strengthening and intrinsic permeability coefficient of cortical done tissue [Ph. D.] Mechanical Engineering
• Ligon, Samuel Braggins (2020) Optimization of Mixing Efficiency in Low Reynolds Unlike Doublet Injectors by Incorporating Swirl [M.S.] Mechanical Engineering
• Lindsted, Robert Dean (1971) Heat transfer from a vertical flat plate using forced and natural convection with air baffles.[MS] Mechanical Engineering
• Liu, Zhuang (2021) Measurement on Stress-Time Avalanches of Fiber Reinforced Concrete Beams During Flexure [Ph. D.] Mechanical Engineering
• Liu, Yì (2021) 3D Acoustic Pipe Locator Imaging Based on Finite Element Analysis [M.S.] Mechanical Engineering
• Liversedge, Daniel (1996) Systematic design of a zero-lift bracket for a continuous casting machine [M.S.] Mechanical Engineering
• Lotito, Mark A. (1995) Alternative articulating surfaces for lubrication enhancement and friction reduction in total joint arthroplasty [M.S.] Mechanical Engineering
• Louisos, William F. (2005) Viscous effects in 2-D supersonic mocro-nozzle flow [MS] Mechanical Engineering
• Louisos, William Frederick (2009) Numerical studies of viscous flow in supersonic micronozzles [PhD] Mechanical Engineering
• Love, George Martin Cunningham (2022) pymooCFD - a Multi-Objective Optimization Framework for CFD [M.S.] Mechanical Engineering
• Lubinski, Jacob R. (2007) Biomechanical and swelling behaviors of the intervertebral disc in varying osmotic environments [MS] Mechanical Engineering
• Lutz, Andrew J. (2011) Investigation of CN production from carbon materials in nitrogen plasmas [MS] Mechanical Engineering
• Lutz, Andrew J. (2015) Experimental Investigation And Analysis Of High-Enthalpy Nitrogen Flow Over Graphite [PhD] Mechanical Engineering
• Ma, Shunli (1993) An experimental system for real-time study of blood coagulation protein binding kinetics under flow conditions [M.S.] Mechanical Engineering
• Makkenchery, Suresh (1969) A water reactor pressurizer model with bubble rise and condensate drop dynamics.[MS] Mechanical Engineering
• Malina, Evan W. (2011) Mechanical behavior of atomically thin graphene sheets using atomic force microscopy nanoindentation [MS] Mechanical Engineering
• Martin, Nicholas C. (2017) Steady state simulation of pyrolysis gases in an inductively coupled plasma facility [MS] Mechanical Engineering
• Martinek, Angela (1983) Robotics application methodology and motion study [M.S.] Mechanical Engineering
• Mastro, Giustino Nicholas (1969) A further investigation to determine an index to adjust snow ski bindings : with emphasis on ski binding characteristics and analysis of ski accident statistics.[MS] Mechanical Engineering
• Matta, Joseph Tannus (1961) The effect of temperature and time on the shrinkage stresses within thermosettings.[MS] Mechanical Engineering
• Mayer, Christopher R. (1974) A method of analysing stress intensity factors of a crack in the region of contact stresses.[MS] Mechanical Engineering
• Maynard, Auston (2011) Particle removal from a surface by a bounded vortex flow [MS] Mechanical Engineering
• McCabe, Justin W. (2009) Monopropellant fuel injection using two-phase micro-slug formation [MS] Mechanical Engineering
• McConnell, Raymond Arnott (1972) Discharge of heated water into an ambient reservoir.[MS] Mechanical Engineering
• McCune-Sanders, W. Jason (2018) An autothermal, representative scale test of compost heat potential using geostatistical analysis [MS] Mechanical Engineering
• McDevitt, M. Ryan (2011) Numerical study of disperse monopropellant microslug formation at a cross junction [MS] Mechanical Engineering
• McDevitt, M. Ryan (2014) A discrete, multiphase approach to monopropellant-based micropropulsion [Ph. D.] Mechanical Engineering
• McGarry, Matthew T. (2004) Numerical simulations of arterial and venous bleeding [Ph. D.] Mechanical Engineering
• McLean, James S. (2017) Navigational complexity within building codes [PhD] Mechanical Engineering
• Medoff, Howard P. (1990) The relationship between performance, comfort and safety in alpine ski boots [Ph. D.] Mechanical Engineering
• Menon, Praneet (2013) A diagnostics approach for helicopter drive train systems [MS] Mechanical Engineering
• Merkel, Daniel (2014) Fabrication and testing of flexible indium antimonide nanowire networks [M.S.] Mechanical Engineering
• Merten, Charles William (1980) Some effects of thermal cycling on a tungsten carbide-cobalt alloy [M.S.] Mechanical Engineering
• Merten, Charles William (1983) Thermal shock/fatigue of WC-Co alloys [Ph. D.] Mechanical Engineering
• Michalek, Arthur James (2009) Structural influences of damage to the intervertebral disc anulus fibrosus at multiple scales [PhD] Mechanical Engineering
• Miller, John H. (1987) A microprocessor based low power data acquisition system [M.S.] Mechanical Engineering
• Miller, Mark S. (2002) Locomotor activity of Drosophila melanogaster (Fruit flies) during microgravity and hypergravity exposure [Ph. D.] Mechanical Engineering
• Miller, Jonathan (2004) Robotic systems for inspection surveillance of civil structures [M.S.] Mechanical Engineering
• Miner, Louis H. (1964) On the strength of glass with different methods of loading.[MS] Mechanical Engineering
• Misra, Nityananda (1972) Solid lubricants for hot forming.[MS] Mechanical Engineering
• Montane, Paul (2017) Ripple performance instrumentation, modeling, and testing for wet tantalum capacitors [Ph. D.] Mechanical Engineering
• Murphy, Michael Clifford (1969) The dependance of glass reinforced resin composite fracture energy on temperature and humidity.[MS] Mechanical Engineering
• Murphy, Michael Clifford (1972) The principles of fracture mechanics applied to the failure modes of fiber reinforced composites and to the fatigue of selected brittle resins and glass.[PhD] Mechanical Engineering
• Nadler, Michael E. (2010) Experimental measurement of mixing lengths of converging particulate flows in a microchannel [MS] Mechanical Engineering
• Neary, Timothy Edward (1996) In-situ measurement of lamb wave phase velocities in composite plates with an application for defect detection [Ph. D.] Mechanical Engineering
• Nenninger, Tara (2022) Atomic-Scale Analysis of Solute Segregation Energy Into Grain Boundaries and Polycrystals [M.S.] Mechanical Engineering
• Nolan, Christopher Michael (2023) Silicon Carbide Fabric Catalysis Assessment in an Inductively Coupled Plasma Facility [M.S.] Mechanical Engineering
• Novotny, John Emil (1997) Experimental and analytical investigations of the glenohumeral joint [Ph. D.] Mechanical Engineering
• O'Neil, Daniel (2022) The Optimization of Rifle Barrel Harmonics [M.S.] Mechanical Engineering
• Ogden, David D. (1993) Spinal characterization by transverse tests in vivo [M.S.] Mechanical Engineering
• Orfeo, Daniel J. (2018) Mechano-magnetic telemetry for urban infrastructure monitoring [M.S.] Mechanical Engineering
• Orfeo, Daniel Jerome (2021) Shaped and Structured Fields for Underground Remote Sensing and Communication [Ph. D.] Mechanical Engineering
• Owens, Walten (2011) Development of a 30kW inductively-coupled plasma torch for high temperature aerospace material testing at UVM [MS] Mechanical Engineering
• Owens, Walten (2015) Aero-Thermal Characterization Of Silicon Carbide Flexible Tps Using A 30kw Icp Torch [PhD] Mechanical Engineering
• Ozaltin, Oguzcan (1962) The surface effects of various environments and the thermosetting resins on glass.[MS] Mechanical Engineering
• Paris, Trevor Taylor (2022) Electrospraying of Designer Alginates for the Production of Powder-Based Tissue Sealants [M.S.] Mechanical Engineering
• Parsons, Milton A. (1993) Material characterization of wrinkling instabilities in polyester webs [M.S.] Mechanical Engineering
• Patterson, Michael K. (1989) A critical review of the hyperbolic heat conduction equation [M.S.] Mechanical Engineering
• Patterson, Michael K. (2000) The geometric dependence of the thermal conductivity of heterogeneous media [Ph. D.] Mechanical Engineering
• Pearl, Jason M. (2016) Two-Dimensional Numerical Study of Micronozzle Geometry [MS] Mechanical Engineering
• Pearl, Jason (2019) Quadrature-Based Gravity Models for the Homogeneous Polyhedron [Ph. D.] Mechanical Engineering
• Pearson, Stephen H. (2014) Nonlinear ball chain waveguides for acoustic emission and ultrasound sensing of ablation [M.S.] Mechanical Engineering
• Pelczarski, Noel V. (1999) Cure monitoring of composite laminates used in the manufacturing of snowboards [MS] Mechanical Engineering
• Penide Fernandez, Rodrigo (2020) Experimental and Computational Studies of Heat Transfer in Flexible Two-Dimensional Woven Fiber Ceramic Materials [Ph. D.] Mechanical Engineering
• Pereira, Mauricio (2019) Ground Penetrating Radar Imaging and Systems [M.S.] Mechanical Engineering
• Picard, Ève-Audrey (2021) Atomistic Simulation Study of Nickel Solute Segregation and Mechanical Behavior in Nanocrystalline Fcc, Bcc and Hcp Binary Alloys [M.S.] Mechanical Engineering
• Plante, Owen (2023) Surface Temperature Measurement Fidelity in High Enthalpy Plasma Test Facilities [M.S.] Mechanical Engineering
• Plumpton, James Osborne (2004) Active membrane masks for improved overlay performance in proximity lithography [M.S.] Mechanical Engineering
• Pond, Ian (2015) Toward an Understanding of the Breakdown of Heat Transfer Modeling in Reciprocating Flows [MS] Mechanical Engineering
• Pope, M. H. (1972) On the fracture of bone substance.[PhD] Mechanical Engineering
• Porter, Aaron (2014) Atomistic simulation study of thermal transport in nanotwinned silicon materials [MS] Mechanical Engineering
• Potisiri, Pongsuk (1972) The design and pilot model of a solid state clinical thermometer.[MS] Mechanical Engineering
• Prabhu, Manohar S. (1969) The effect of vapor velocity in laminar film condensations on a vertical wall.[MS] Mechanical Engineering
• Pringle, Malcolm Ryan (2021) Strengthening Mechanisms in Nanocrystalline Silver-Nickel Nanolayered Materials [M.S.] Mechanical Engineering
• Qian, Dongmin (2011) Efficiency analysis of solar panel dust mitigation using an electric curtain [MS] Mechanical Engineering
• Rastogi, Ramesh C. (1970) Condensation of a two-phase flow on a vertical plate.[MS] Mechanical Engineering
• Razinger, Jonathan (2014) Performance evaluation of an air-coupled phased-array radar for near-fielf detection of steel [MS] Mechanical Engineering
• Reilly, James (2019) Design, Prototyping and Fabrication of Powder Spray Device for Dehydrated Biological Particulates [M.S.] Mechanical Engineering
• Renjitham Sankaran, Simtha (2012) An overset grid vorticity transport method for flow past fixed and moving bodies [PhD] Mechanical Engineering
• Riddell, James A. (1995) Industrial research and development projects in the academic environment [M.S.] Mechanical Engineering
• Ro, Ik Sang (1974) A method for analyzing inclusions in the near field of an elastic contact problem.[MS] Mechanical Engineering
• Roberts, Jon M. (1997) Two-dimensional finite element models used to determine tissue stiffness and stress in trabecular bone of the human lumbar spine [M.S.] Mechanical Engineering
• Rohyans, Kevin J. (2002) Quasi-static profiles of a compound drop growing from a submerged concentric needle arrangement [M.S.] Mechanical Engineering
• Rollin, Bertrand (2008) On the influence of large scale forcing and flow topology on the dynamics of small-scale turbulent transport [PhD] Mechanical Engineering
• Rong, Hong (1988) Damping synthesis using free-interface complex substructure modes [M.S.] Mechanical Engineering
• Sala, Kyle Paul (2013) Analysis of stochastic methods for predicting particle dispersion in turbulent flows [MS] Mechanical Engineering
• Salter, Robert J. (1991) Tap breakage prediction during real time thread formation [M.S.] Mechanical Engineering
• Saunders, Daniel Curtis (2017) Wind turbine wake Interactions : characterization of unsteady blade forces and the role of wake interactions in power variability control [PhD] Mechanical Engineering
• Sauter, Wolfgang (2000) Thin film mechanics bulging and stretching [Ph. D.] Mechanical Engineering
• Saxena, Rakesh (1998) A three-dimensional finite element scheme to investigate the apparent mechanical properties of trabecular bone [Ph. D.] Mechanical Engineering
• Schindler, Jeffrey C (2021) Absolute Number Density Measurements of Atomic Species in Air and Nitrogen Plasmas [M.S.] Mechanical Engineering
• Schmelzer, Warren (1992) A multi-degree-of-freedom force transducer with modular sensing elements [M.S.] Mechanical Engineering
• Schoon, Richard J. (1981) A method to determine the exterior ballistics of two constrained bodies [M.S.] Mechanical Engineering
• Seibert, Willard Julius (1963) Static fatigue characteristics of fiber glass filament wound pressure vessels.[MS] Mechanical Engineering
• Seksinsky, Drue (2020) Modeling Volcanic Ash Particle Impingement in the Hot Sections of a Gas Turbine Engine [M.S.] Mechanical Engineering
• Shadel, Gregg Henry (1978) Analysis and instrumentation of a heat storage material for transport property determination [MS] Mechanical Engineering
• Shakun, Wallace (1964) Mathematical model of a dynamic system having multiple degrees of freedom.[MS] Mechanical Engineering
• Sharp, Frederick G. (1981) Analysis of vibrations induced by non-circular gearing [M.S.] Mechanical Engineering
• Shuster, Samuel B. F. (2018) Design and evaluation of a tactile texture production system [MS] Mechanical Engineering
• Skinner, David Robert (1971) A finite element model for static and dynamic analyses of axisymmetric shells.[MS] Mechanical Engineering
• Smith, Joshua Woodward (1985) An experimental investigation of the hot working behavior of an aluminum-magnesium-silicon alloy [M.S.] Mechanical Engineering
• Smith, Suzanne D. (1988) The biodynamic response characteristics of a seated primate to whole-body gz vibration exposure using the non-invasive impedance technique [Ph. D.] Mechanical Engineering
• Smith, Silas F. (2013) Investigation of subsonic and supersonic flow characteristics of an inductively coupled plasma torch [MS] Mechanical Engineering
• Spencer, Graham Thornton (2006) Composite drive shaft dynamic response optimization [MS] Mechanical Engineering
• Steinhurst, William Ronald (1988) On some aspects of the thermoplastic instability in engineering [Ph. D.] Mechanical Engineering
• Stern, Mitchell (2023) Surface Volatilization Investigation of Graphite [M.S.] Mechanical Engineering
• Stevenson, Kevin D. (2006) Electrochemical synthesis and mechanical properties of nickel nanostructures [MS] Mechanical Engineering
• Steward, Anthony (2001) Material structural characterization using dynamic system analysis [M.S.] Mechanical Engineering
• Storm, Randall (2023) Colloidal Particle Transport in Porous Media [M.S.] Mechanical Engineering
• Strang, William Zeitler (1984) Shock-free transonic airfoil design by a hodograph method [M.S.] Mechanical Engineering
• Sturnick, Daniel (2013) The relationship between knee joint geometry and risk of suffering anterior cruciate injury : a prospective study with a nested case-control analysis [MS] Mechanical Engineering
• Suiter, Kari E. (2000) Gantry control and design of an X-ray stepper y-stage [M.S.] Mechanical Engineering
• Ten Haagen, Christopher Wescott (1976) Advancement of the double torsion facture toughness test.[MS] Mechanical Engineering
• Thompson, Corinna Sue (2009) Analysis of spectrally resolved shock-layer emission [MS] Mechanical Engineering
• Tillson, Corey C. (2017) Investigation of pyrolysis gas chemistry in an inductively coupled plasma facility [MS] Mechanical Engineering
• Tomko, Timothy (2015) Bioprospecting for Genes That Confer Biofuel Tolerance to Escherichia Coli Using a Genomic Library Approach [MS] Mechanical Engineering
• Tomko, Timothy (2017) Bioprospecting for Genes That Confer Biofuel Tolerance to Escherichia Coli Using a Genomic Library Approach [PhD] Mechanical Engineering
• Trevaskis, Walter Allen (1965) Statistical estimation of frangible circuit failure using probit analysis.[MS] Mechanical Engineering
• Turner, William James (2014) Understanding and improving microbial biofuel tolerance as a result of efflux pump expression through genetic engineering and mathematical modeling [MS] Mechanical Engineering
• Uhl, J. (2012) Pyrolysis investigation in an ICP torch facility [MS] Mechanical Engineering
• Vachon, Nicholas M. (2010) A bound vortex surface impingement method for adhered dust particle removal [MS] Mechanical Engineering
• Vachon, Nicholas M. (2013) A bound-vortex surface impingement method for dust particle removal and enhance heat transfer [PhD] Mechanical Engineering
• Valdez, Eduardo Enrique (2020) Knee Articular Cartilage Material Properties Estimation Through FEA [M.S.] Mechanical Engineering
• Voll, Brandon (2021) Carbon Monoxide Measurements in a CO2 Plasma Using Two-Photon Laser Induced Fluorescence [M.S.] Mechanical Engineering
• Vorsteveld, Lolke Geert (1985) Two-dimensional ignition theory for a reactive solid [M.S.] Mechanical Engineering
• Vorsteveld, Lolke Geert (1988) Geometric considerations in the ignition process of solid propellants : theory and experiment [Ph. D.] Mechanical Engineering
• Walker, Roger C. (1981) Response of a gun tube to travelling projectile mass [M.S.] Mechanical Engineering
• Weisman, Gerald (1978) On the mechanical properties of ligaments under cyclic loading [MS] Mechanical Engineering
• Whalen, Paul Michael (1977) A sparse matrix address translator [NA] Mechanical Engineering
• Whitmore, Samuel (2020) Numerical Simulations of an Inductively Coupled Plasma Torch [M.S.] Mechanical Engineering
• Widdis, Stephen J. (2012) Computational and experimental studies of catalytic decomposition of H₂O₂ monopropellant in MEMS-based micropropulsion systems [MS] Mechanical Engineering
• Wigdalski, Adam (2007) Numerical simulations of convection in a cavity driven by an oscillating heated boundary [MS] Mechanical Engineering
• Wilder, David Gould (1986) On loading of the human lumbar intervertebral motion segment [ph. D.] Mechanical Engineering
• Wilder, David Gould (1978) On the mechanics of the lumbar spine [MS] Mechanical Engineering
• Williams, Jacob (2021) A Peridynamic Simulation of Repeated Projectile Impacts on a Steel Plate [M.S.] Mechanical Engineering
• Willsey, James C. (1996) Deisgn and fabrication of a center of mass indicator [M.S.] Mechanical Engineering
• Wood, Erin Leigh (2014) An atomic force microscopy nanoindentation study of size effects in face-centered cubic metal and bimetallic nanowires [Ph. D.] Mechanical Engineering
• Wood, Stephanie (2017) Gravitational Potential Modeling of Near-Earth Contact Binaries [MS] Mechanical Engineering
• Yao, Xiangxiao (2020) Using Dielectric Characterization to Study Transport and Thermal Properties of Gas/Supercritical Fluid Embedded Polymer Solution [Ph. D.] Mechanical Engineering
• Yin, Fuqian (2022) Emergence of Elasto-Inertial Turbulence in 2D Natural Convection Flow With Polymer Additives [M.S.] Mechanical Engineering
• Young, Sarah K. (1999) Pin-on-disk and functional wear testing of ultra high molecular weight polyethylene : effects of surface patterning and oxidation level [M.S.] Mechanical Engineering
• Zhao, Xiangdong (1999) Tuned mass damping absorber for payload swaying of construction crane [M.S.] Mechanical Engineering
• Zilić, Adis () Numerical simulations of supersonic flow in a linear aerospike micro nozzle [MS] Mechanical Engineering
• Zuniga Cuellar, Kevin Dimas (2023) Tools to Measure Dispersion Descriptors From Polymer Nanocomposites [M.S.] Mechanical Engineering