Civil Engineering

• Adams, Laurie A. Batchelder (1987) The influence of solids flux variability on secondary clarifier capacity [M.S.] Civil Engineering
• Aldinger, Paul Bruce (1973) Geotechnical properties of a varved clay deposit.[MS] Civil Engineering
• Alghamdi, Saleh J. (2016) A Preliminary Study on the Interfacial Strength of Red Abalone [MS] Civil Engineering
• Anderson, Ian (2012) Durability of pervious concrete with fly ash subjected to freeze-thaw and salt exposure, in a simulated field environment [MS] Civil Engineering
• Arnold, William Robert (1972) A general discussion of the application and theory of sparse matrices within the finite element method.[MS] Civil Engineering
• Barboza, Michael J. (1981) Carbon monoxide permeation systems as calibration standards [M.S.] Civil engineering
• Bianchi, J. Christopher (1993) Velocity measurements of low Reynolds number tube flow using fiber-optic technology [M.S.] Civil Engineering
• Cummings, Robert James (1974) Denitrification of concentrated nitrate wastewaters [MS] Civil Engineering
• Davis, James Lyford (1911) Some properties of Portland cement concrete.[MS] Civil Engineering
• Dolhon, Anthony M. (1987) Modal sensitivity for structural parameter estimation [M.S.] Civil Engineering
• Eberle, Kevin C. (1990) The phosphorus assimilative capacity of a palustrine wetland in Shelburne, Vermont [M.S.] Civil Engineering
• Eldred, Philip Norcross (1963) Analysis of two-dimensional stresses using the method of finite differences.[MS] Civil Engineering
• Ernst, Matthew R. (2009) Assessment of the breeding barn roof structure using truss member resonant frequencies and com [MS] Civil Engineering
• Finnigan, Peter Michael (1973) Rapid convergence of elasto-plastic plane stress and plan strain problems using the finite element method.[MS] Civil Engineering
• Fisher, Kenneth F. (1991) Applicability of hydrologic modeling to tactical military decision making [M.sS.] Civil Engineering
• Fitzgerald, Brian J. (1982) Variability of pH and trace metal concentrations during single precipitation events [M.S.] Civil Engineering
• Fowler, Bruce A. (1985) Flux characteristics of phosphorus rich sediments from St. Albans Bay, Lake Champlain [M.S.] Civil Engineering
• Gates, Raymond Smith (1931) A study of the heating of some of the buildings at the University of Vermont [MS] Civil Engineering
• Goetz, Lee Ann (1993) Fiberglass dust generation due to removal of orthopedic fiberglass reinforced resin casts [M.S.] Civil Engineering
• Gomez, Brian W. (2013) Evaluation of design assumptions for structural backfill of abutments and retaining walls [NA] Civil Engineering
• Gunn, George Alan (1967) Ground water flow system responses to natural rainfall in a forested New England watershed.[MS] Civil Engineering
• Hango, Roy Anton (1973) Wastewater treatment for integrated circuit manufacturing.[MS] Civil Engineering
• Harrod, Peter Ellis (1973) Direct optimization using limit design for reinforced concrete continuous beams [MS] Civil Engineering
• Haupt, Richard Stanton (1972) Case history-Embankment failure on soft varved silts.[MS] Civil Engineering
• Howley, James Bernard (1973) Biological treatment of septic tank sludge.[MS] Civil Engineering
• Lamson, Robert Roy (1967) Response of soil moisture and litter flow to natural rainfalls in a forested New England watershed.[MS] Civil Engineering
• Lawrence, Wayne Douglas (1972) Application of aerial photography in engineering soils mapping and highway route location.[MS] Civil Engineering
• Lester, George (2013) Evaluation of pulsed pumping in porous media containing sharp material interfaces, using laboratory experiments and modeling [MS] Civil Engineering
• Lindberg, John E. (1993) An evaluation of EPA's industrial source complex short-term (ISCST) air quality model through an SF₆ tracer study conducted under building downwash conditions at a natural gas fired central heating plant [M.S.] Civil Engineering
• Lintermann, Christopher (1986) Impact testing and finite element representation of a cable-stayed pedestrian bridge [M.S.] Civil Engineering
• Livingston, Thomas S. (1993) Estimation of axial load in prismatic members using flexural vibrations [M.S.] Civil Engineering
• Llewellyn, Lance Allan (1972) A tertiary wastewater treatment system for seasonal resort areas.[MS] Civil Engineering
• MacArthur, Gordon B. (1975) An evaluation of the use of analytical origin-destination and traffic assignment models in a small Vermont community [M. Sc.] Civil Engineering
• Mackenzie, Steven Edward (1973) Effects of dissolved oxygen concentration on microbial cell yield in activated sludge and attached films [MS] Civil Engineering
• Maille, Nathan (2008) Assessing the roof structure of the breeding barn using truss member resonant frequencies [MS] Civil Engineering
• Mansfield, Richard Henry (1971) An investigation into the upgrading of Vermont's water pollution control program.[MS] Civil Engineering
• May, Geoffrey (2013) Weighted multi-metric finite element updating : application to non-composite bridge decks [MS] Civil Engineering
• Michael, Richard Paul (1973) Optimization of biological denitrification reactors in treating high strength nitrate wastewater.[MS] Civil Engineering
• Morse, Richard Schuyler (1973) A method for predicting flood discharges with varying return periods for small watersheds within the state of Vermont.[MS] Civil Engineering
• Nakamura, Takao (1979) An evaluation of integration methods and damping terms for a finite element model of transient shallow water circulation [M.S.] Civil Engineering
• Nelson, Jeffrey A. (1992) A Physical site characterization of the Bethel-Royalton landfill in Royalton, Vermont [M.S.] Civil Engineering
• Nichols, Robert Bacon (1988) Use of the one dimensional dispersion model in a horizontal flow inhalation chamber [M.S.] Civil Engineering
• O'Shaughnessy, Patrick T. (1993) Automatic control of chamber aerosol concentrations [M.S.] Civil Engineering
• Perrin, Douglas Richard (1974) Physical and chemical treatment of septic tank sludge.[MS] Civil Engineering
• Ribbans, Brian (2015) Bioinspired Study on the Mechanical Performance of Helicoidal Fiber Structures [MS] Civil Engineering
• Saunders, George Alexander (1976) An investigation of the dynamic response of hysteretic hardening single degree of freedom systems.[MS] Civil Engineering
• Sevee, John Edward (1973) Shear strength anisotropy in a laminated silt.[MS] Civil Engineering
• Shattuck, Robert Ford (1971) A proposal and examination of a new bridge expansion joint systems.[MS] Civil Engineering
• Smith, William Alfred (1964) An investigation into analytic and experimental methods of solution for practical flat plate thermal stress problems.[MS] Civil Engineering
• Stone, Daniel W. (1976) Vermont's water resource research needs.[MS] Civil Engineering
• Stopford, Elizabeth E. (1999) Investigation of byproduct formation and changes in kinetic properties during the treatment of two chlorinated compounds using reactive iron media [M.S.] Civil Engineering
• Stuart, Lynne Stenberg (1987) Tertiary nitrogen removal by a periphytic algal community in cold climates [M.S.] Civil Engineering
• Sullivan, James L. (2009) Advancement of the empirical relevance and scalability of the network robustness index for highway transportation networks [MS] Civil Engineering
• Thompson, Robert L. (1926) The production of lime in Vermont [M.S.] Civil Engineering
• Tirk, Nathan (2014) Data driven uncertainty quantification of vehicular live load effects in bridges [M.S.] Civil Engineering
• Tozer, Hugh G. (1988) The influence of operational conditions on the variability of solids settleability at full-scale activated sludge treatment plants [M.S.] Civil Engineering
• Van der Hoven, Elizabeth J. (1994) Removal of coal tar from contaminated soils using cosolvent flushing [M.S.] Civil Engineering
• Villamor Lora, Rafael (2015) Geomechanical characterization of Marcellus shale [MS] Civil Engineering
• Zhang, Hai-Yan (1992) Approximate method for minimum bracing stiffness for stability of repeated structures [M.S.] Civil Engineering